SnapStone's interlocking porcelain tile installs directly over most vinyl, wood, tile and concrete floors as long as that surface is smooth, flat, clean and within the tolerance requirements. No thinset or underlayment is required, so most installations can be completed in a single day.
Just Prep, Snap, Grout... It's that easy to install your beautiful new SnapStone porcelain tile floor.
Note: Finish, texture, shade, color and sheen variations are normal in glazed porcelain tile and can vary between production lots. For best results, please ensure all tile for your project has been produced from the same lot. Lot numbers are indicated by the barcode on each box of tile.
- Additional Information
Type Interlocking Size 6" x 6" Finish Matte Grout Family 1/4 Inch Tolerance (Flat and smooth) For tile with all edges shorter than 15", maximum allowable variation is 1/4" in 10' from the required plane, with no more than 1/16" variation in 12" when measured from the high points in the surface. For tiles with at least one edge 15" in length, maxim Tile Thickness 9mm System Thickness 15mm Sub-Floor Requirements 5/8" Installs Over Radiant Heat Yes Cuts With Wet Saw, Tile-Cutter Color Variation V3 Available In 6" x 6", 12" x 12" PEI Rating 4 Acceptable Applications Perfect for almost any room in your home.
Disclaimer: The images represented have been provided to give you a visual representation of our products. However, due to variations in photography, print calibrations, color printing settings, and lighting sources, we cannot guarantee that the actual product will be an exact match to the colors represented.